Home > LED Intermediate Bulbs > LED Light Bulbs, Intermediate Base > 15mm Bayonet Based LED Automotive Lamps
Note:
LED brake/tail lamps may not work with some older thermal flasher units.
An LED brake/tail lamp will require an electronic flasher/blinker unit which is commonly available at your local auto parts store.
White LED technology is patent protected in the US. LEDtronics White LED products are covered under these patents.
• Patent No.: US D470,255 S • Patent No.: US D474,848 S • Patent No.: US 6,598,996,B1 • Patent No.: US 7,040,790,B2 Click here for a website that matches vehicle make and model year to replacement bulb part number. www.sylvania.com/ConsumerProducts/AutomotiveLighting/LampReplacementGuide/default.htm
All Series under this Category:
AUT1157 Multi-Mode Indexed DC Bayonet AUT1156 One-Mode, SC Bayonet AUT-RES Load Resistor
Available (for large quantity orders) in Non-Indexed 15mm DC Bayonet for Tail/Brake/Turn Applications as AUT1157DB Series
Contact Factory for Full Part number.
12/14 Vdc
Electrical-Optical Characteristics (Ta = 25°C)
‡‡Full Beam Width at 50% Intensity
12/14 Vdc
Electrical-Optical Characteristics (Ta = 25°C)
24 / 28 Vdc
Electrical-Optical Characteristics (Ta = 25°C)
‡‡Full Beam Width at 50% Intensity
Load Resistor Statement: If installing LED bulbs in your car or motorcycle causes your blinkers to blink fast or causes other electrical problems you may need to install a load resistor to correct these problems. Since LED bulbs draw much less current than standard incandescent bulbs your electrical computer system may think that your bulbs are not working. The AUT-RES-6-50 should resolve these problems. This is a 6 Ohms 50 Watt resistor that needs to be installed in-parallel with your tail/blinker lights, one Load resistor (AUT-RES-6-50) is required for each tail/blinker light.
Load Resistor
Electrical-Optical Characteristics (Ta = 25°C)
Caution: This Load Resistor (AUT-RES-6-50) gets extremely hot and needs to be installed correctly. The flat surface of the AUT-RES-6-50 needs to make a good secure contact on a clean flat metal surface on your car or motorcycle. This will act as a heat sink which should keep the Load Resistor (AUT-RES-6-50) cooler. Keep this Load Resistor (AUT-RES-6-50) away from oil, skin, plastic, wires , combustible gases and flammable materials. LEDtronics is not responsible for damage caused to persons or property with installation of the Load Resistor (AUT-RES-6-50).
Prop. 65 Warning WARNING: This product can expose you to chemicals including Di(2-ethylhexl)pthalate (DEHP), which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov All specifications and pricing subject to change without notice.
|