Part #: RPLH16-02-01-02Z47

LED Panel Indicators, On @>50Vdc, Relampable, 16mm (5/8") Mtg.Dia.


Features
  • Sale Item (Sale Terms & Conditions)
  • Zener diode prevents undesired premature LED illumination from trickle voltages.
  • For utility and power plant industrial control indicators.
  • Comparable to UL 508
  • NEMA 3, 4, 4X, 5, 6, 12
  • Fluted Lens
  • Solid-State: High-Shock- & High-Vibration-Resistant
  • Long Life: White LEDs Last up to 50,000 Hours; Colored LEDs up to 100,000 Hours of Continuous Operation
  • Optimized Circuitry: Power Factor Corrected for Maximum Efficiency
  • Wide Operating Temp. Relative Humidity: Rated for Operation in Non-Condensing Relative Humidities between 5% and 95%
  • Maximum panel thickness: 0.25" [6.35mm]
  • Minimum center-to-center spacing:
    Horizontal, 1.75" [44.4mm]
    Vertical, 2.00" [50.8mm]
  • 40+ Years LEDtronics Design & Manufacturing
  • 'Made in USA' option available for qualified volume orders. Contact the factory.

 

Choose Options:

Color Options
Voltage Options

Spec Sheets




Applications

  • For Apps Where Restricting Trace Voltages Below 50Vdc from Triggering LED Illumination Is a Necessity
  • Industrial Controls
  • Panel Mount Retrofit Applications
  • Visual Factory Controls
  • Signaling Solutions
  • Control Lighting
Color
Ultra Red  
Wavelength (nm)
Voltage (V)100~277Vac
(Tested@120Vac)
Power (Watts)154 W
Current (Amps)1.25 A
Operating Temp-20°C ~+50°C, IP65
Power Factor0.9407
Efficacy135.77
Intensity (Candela)5738 cd
Lumens20908.5 lm
CRI70
Viewing Angle140°
Illum PttrnType-V (Circular)
Electrical-Optical Characteristics (Ta = 25°C)

Possible Options

    For volume orders and qualified applications
  • Other LED colors available
  • Other voltages available
  • Pilot Light Assembly Part Number Example:
    02 = (1-LED, 5mm); 06 = (4-LED, 5mm); 03 = (7-LED, 3mm)
    * Volts = Full voltage. Customer defines incoming voltage, lamp in holder is made to that voltage.
    This holder contains no current limiting resistor. (Example RPLH16-24-01-02 [24 Volt incoming source])
    ** = 48 & 130VDC use an internal series resistor to drop the voltage across the LED bulb to 28 Volts.

Caution

  • (Concerning single color panel holders only, not bicolor holders): RPLH holders and indicators do not have polarity markings since they all use bipolar LED bulbs which are not sensitive to polarity
  • Not for dimming

Contact Us

Send us an email

Call Us

Speak to a customer service representative

An error has occurred. This application may no longer respond until reloaded. Reload 🗙